Clean the Pool Enclosure Without Treating Screens Like Concrete
A Florida pool cage is exposed to humidity, afternoon storms, pollen, leaves, insects, sprinkler mist, tree debris and constant moisture around the pool area. Over time, screen mesh can look gray or green, aluminum framing can collect organic buildup, and corners around doors, rails and support members can become noticeably darker than open sections.
Go2 Pro Cintron Pressure Washing LLC provides professional pool cage cleaning from our New Port Richey base throughout Tampa Bay. The process is built around the enclosure itself. Screen mesh, spline, painted or powder-coated aluminum, door hardware and nearby pool surfaces should not be cleaned as if they were a driveway.
The goal is to clean the enclosure carefully from top to bottom while paying attention to age, existing screen damage, oxidation, landscaping, furniture and the pool area below.
Recent Pool Cage Project in Hudson
Why Pool Cages Get Dirty So Fast in Florida
The enclosure sits where several sources of moisture and organic debris meet, so different parts of the cage can soil at different rates.
Screen Mesh Holds Fine Debris
Pollen, dust, airborne debris, cobwebs and organic film can collect across screen mesh. The buildup may be subtle at first, then become obvious when sunlight hits the enclosure or when one panel stays shaded longer than another.
Frames & Cross Members Stay Wet
Horizontal rails, upper beams, corners and lower frame sections can hold water and debris after storms. Those slower-drying areas often show green or dark organic growth before the open screen panels do.
Landscaping Adds More Moisture
Plants, mulch, irrigation and dense backyard landscaping can keep the lower perimeter damp. Splashback from soil and planters can also leave the bottom of the enclosure much dirtier than the upper sections.
Screens Need a Different Approach
Low Pressure Matters Around Screen Mesh, Spline & Aluminum
High-pressure cleaning that may be appropriate on durable concrete can tear aging screen, loosen spline, damage door screens or create problems on oxidized and weathered aluminum. That is why pool enclosure cleaning should begin with the condition of the cage, not with the maximum pressure a machine can produce.
Go2 Pro can use lower-pressure application and rinsing where appropriate so the cleaning solution and dwell time do more of the work on organic buildup. Existing tears, loose panels, damaged hardware, heavy oxidation and failing finishes should be identified before cleaning because washing cannot repair those conditions.
If the pool deck also needs work, it is evaluated separately. A concrete deck, sealed paver deck or decorative coating has different cleaning needs from the enclosure above it.
Get a Pool Cage Estimate
What Our Clients Say
Clean From the Top Down So Dirty Enclosure Water Does Not Become the Last Step
A pool cage and pool deck are connected visually, but they are not the same cleaning job. When both are being serviced, the sequence matters. Cleaning upper beams, screens and enclosure framing first can prevent dirty rinse water from becoming the final thing that lands on a freshly cleaned deck.
The same planning applies to furniture, grills, planters and pool accessories. Clearing or protecting the work area gives better access to lower rails, screen corners and door sections while reducing the chance that debris is simply moved from one object to another.
For screened lanais with heavy buildup, we also look at where the dirt is coming from. Overhanging trees, irrigation overspray, damp landscaping, roof runoff and shaded corners can explain why one side of an enclosure soils much faster than another.
The Enclosure Has Several Cleaning Zones
A complete cage should be evaluated as more than one large screen.
Upper Beams & Roof Screens
Upper enclosure sections receive direct rain, pollen and tree debris. Access and screen condition matter because these areas can be more difficult to rinse evenly than vertical side panels.
Doors, Rails & Lower Panels
Door frames, handles, kick areas, tracks and lower panels see more hand contact, splashback and landscaping exposure. They often need closer detailing than the broad center of the cage.
Poolside Corners & Shaded Sides
Corners behind furniture and sections near dense landscaping can remain damp longer. Those areas may accumulate algae and organic film sooner than sunnier panels with better airflow.
Request Pool Cage Cleaning
Tell us where the property is located, whether the enclosure is one or two stories, the approximate size, and whether the pool deck should be included in the estimate.
See a Recent Pool Cage Cleaning Project
This September 2026 Hudson project is first-party work completed by Go2 Pro and shows the type of enclosure cleaning this service page is built around.
Pool Cage Cleaning and Pool Deck Cleaning Should Stay Separate in the Scope
The screen enclosure may need a soft, lower-pressure process while the floor below could be concrete, brick pavers, natural stone or a coated pool deck. Those materials should not automatically receive the same chemical mix or water pressure.
Keeping the services separate in the estimate makes it easier to account for screen condition, upper-cage access, deck material, old sealer, stains, furniture and any areas that require extra preparation. If both are needed, they can still be scheduled together.
For the hard surface below the enclosure, visit our pool deck cleaning page or our broader patio cleaning service.
Ask About Cage & Deck Cleaning
Related Exterior Cleaning Services
Pool enclosures often connect directly to other exterior surfaces that need a different cleaning method.
Pool Deck Cleaning
Cleaning for concrete, pavers, coatings and other suitable poolside hard surfaces.
Learn MorePatio Cleaning
Exterior cleaning for patios and outdoor living areas beyond the screened enclosure.
Learn MoreHouse Soft Washing
Lower-pressure cleaning for suitable stucco, siding, soffits, fascia and exterior walls.
Learn MorePool Cage Cleaning FAQ
Can high pressure damage a pool cage?
Yes. Screen mesh, spline, doors and weathered aluminum can be damaged by excessive pressure. The cleaning method should be selected around the enclosure condition rather than treating the cage like concrete.
Can you clean the screens and aluminum frame together?
They can be included in the same enclosure-cleaning scope when their condition allows it. Screens, framing, doors, rails and corners may still need different amounts of attention during the process.
Can you clean the pool deck during the same visit?
Yes. Pool cage and pool deck cleaning can be estimated together, but the deck material is evaluated separately because concrete, pavers, coatings and natural stone do not all use the same cleaning process.
Will cleaning repair torn screens or loose spline?
No. Cleaning can remove appropriate buildup, but it does not repair torn mesh, loose spline, bent framing, corroded hardware, oxidation or failed coatings. Those conditions should be addressed as repairs.
Do I need to move patio furniture first?
Access is easier when furniture, toys, grills, planters and other movable items are cleared from the enclosure perimeter. The exact preparation depends on the size and layout of the pool area.
How often should a pool cage be cleaned in Florida?
There is no universal schedule. Shade, tree coverage, irrigation, nearby landscaping, enclosure height and how quickly the cage dries after rain all affect how fast buildup returns. Visible condition is the best guide.
Pool Cage Cleaning Across Tampa Bay
Go2 Pro is based in New Port Richey and serves pool-cage and exterior-cleaning customers throughout nearby communities including Hudson, Trinity, Holiday, Tarpon Springs, and other communities in our service area directory.